Setting Caller ID (May not be available on all receivers.)

All systems with Caller ID must be properly grounded. The grounding can be at a grounding block. In addition to grounding, Caller ID requires a phone line connected to the receiver, a subscription to Caller ID service through your local phone company and Caller ID enabled in the receiver.

Setting up your Caller ID:


1. Press the Menu button on the remote.
2. Select System Setup from the Main Menu.
   
Note: For DISH 721 and DISH PLAYER-DVR 921
• Select Preferences
• Select View Preferences
• Check Enable under Caller ID Popup
• Select Done
3. Select Installation from the System Setup menu.
4. Select Caller ID
   
Note: For Model 6000
• Telephone System
• Check Caller ID On
• Save
5. Check Caller ID On.
6. Select
• Save For Models: 111, 301, 311, 351, 501, 508, 510, 811
• Done For Models: 211/411, 222, 322, 522, 622, 625, 722, 942

**NOTE: Models 1000, 2000, 2800, 3000, 3750, 3900, 4000, 4900, 5000, and DISHPLAYER 7100/7200 DO NOT have Caller ID.