General Information

DISH 1000+ allows customers to receive programming from four orbital locations; 110°, 118.7°, 119° and 129° using a dish antenna size similar to SuperDISH (Parts are not interchangeable with other dishes). DISH 1000+ will display DBND as the device for 118.7° when a Check Switch test has been run.

Dimensions:

• 1 5/8" mounting mast
• 23.8”h x 30.9"w dish face

Standard Configuration:
DISH 1000+ includes a DP Dual Band LNBF and two DP Dual LNBF. A DPP 44 switch must be used in all DISH 1000+ installations (up to 4 DPP receivers).
• DP Dual Band LNBF for orbital locations; 118.7°, 119°
• DP Dual LNBF for orbital location; 129°,


• DP Dual LNBF for orbital location; 110°,


Models 2800, 6000, and 721 may display the 118.7 orbital locations in the Point Dish and Installation Summery screens as “119K”.
Others will display the 118.7° orbital locations as "118" in these screens.

* All DISH 1000+ will need to be installed with a DPP 44 switch.

Receivers NOT compatible with DISH 1000: (*no 129/118.7 support)
1000, 2000, 3000, 4000, 5000, JVC-IRR, DISHPlayer 7100/7200