AUX Mode Volume Override

*1.5, 3.0, 3.1, 4.0, 5.0, 5.2, 5.3, 6.0, 6.2, 6.3, 8.0, 20.0, and 21.0 Universal Remotes Only

The 'out of the box' setup for these universal remotes is for the volume control to default to TV mode when it is programmed to a TV, even when in SAT or VCR mode. The AUX mode, when programmed, will control volume on the auxiliary equipment.

In AUX Mode Volume Override, the volume control defaults to the AUX mode instead of TV mode. In this mode, you cannot access TV volume at all. This is if you who wish to use the TV as a monitor and control all volume through the stereo system.

To put in AUX Mode Volume Override:
  1. Press and hold the AUX mode button until all buttons light up
  2. Press #
  3. Press Volume +
  4. Press 0
  5. Press #

To put back in TV Default Mode:
  1. Press and hold the TV mode button until all buttons light up
  2. Press #
  3. Press Volume +
  4. Press 0
  5. Press #





Monday December 08 2008     © 2009 Dish Network L.L.C. All rights reserved.