Enabling Record Plus

To enable Record Plus and select the TV location that will record first, perform the following:
1. Press Menu on the remote.
2. Select Preferences, then Record Plus.
3. Select Enable under Activation.
4. Choose the desired TV location (TV1 or TV2) that is not typically watched to record programming first under Record Preference.
   Note: Do not change the preference back and forth between TV1 and TV2. This may cause recording conflicts or loss of recordings.

In Dual Mode with Record Plus enabled, set up future DVR timers at the TV location that was NOT chosen in the Record Plus setting. This will ensure a lower chance of recording conflicts.

Disabling Record Plus

To disable Record Plus, perform the following:
1. Press Menu on the remote.
2. Select Preferences, then Record Plus.
3. Select Disable under Activation.

Dual-Tuner Cheat Sheet