At this time, the DISH Pro Compliant Splitters are only used in two types of installations:

• When installing two satellite locations to two tuners using two DISH Pro Single LNBFs and two DISH Pro DP 21 switches.
• When installing three satellite locations to two tuners using a DISH Pro Twin LNBF, a DISH Pro Single LNBF and two DISH Pro DP21 switches.

Note:

When using a DISH Pro compliant splitter to split the signal from a DISH Pro Single LNBF, the receiver whose DP21 switch is connected to the passing side of the splitter must be plugged into a live power outlet at all times. If not, the DISH Pro Single LNBF will not have any power and will not be able to provide satellite signal to the other receiver.